The VPE Model 2 DSP Dipole Woofer was the result of three years of design and experimentation. The Model 2 provides a good fit, electrically, acoustically, and aesthetically for your larger dipole speakers, (e.g. Magnepan Models 3.7 and 20.7, Quad 2812 and 2912). It is the fastest, best-performing dynamic woofer you have ever heard because it shares the advantages of a dipole - a super-cardioid polar response and NO cabinet resonance or energy storage. The Model 2 is a cubically shaped cabinet with a floor-coupled front slot and an open back. The DSP amplifier is mounted on the back “dog-bone” panel for aesthetics and ease of connection. The Model 2 can be placed in your listening room in between your panel loudspeakers and far enough away from the back wall to provide a dipole response indistinguishable from your large dipole loudspeakers, but much lower in frequency and more powerful than panel loudspeakers are capable of operating.
The Model 2 owes its existence to the writings of two audio legends - Siegfried Linkwitz and Nelson Pass, and the introduction of affordable drivers and DSP-controlled Class D amplification from Dayton Audio. The Model 2 is constructed of Baltic ¾” 12-ply Birch Veneer Plywood and is offered in any color urethane cabinet paint offered by Sherwin-Williams in their “Emerald” line. Bespoke finishes to match your speakers and furniture using veneers in any species of wood, laminates from Formica and Wilson Art or with black acrylic fascia panels are available at additional costs.
Specifications:
Dimensions: 18” wide by 20” high by 16” deep
Weight: 95 Lb.s
Loaded Slot Dimensions: 2” tall by 15” wide
Dynamic Woofer: Dayton Audio RSS315 HO 12” Aluminum Cone - 4 Ohms and 700W of Power Handling
Integral DSP Amplifier Module: Dayton Audio SPA500DSP - Class D 500W
DSP Capabilities: Low and High Pass Crossover Filters and 5 Parametric Equalization Bands (Frequency, Amplitude and “Q”)
High Pass Frequency: 80 Hz (THX Standard)
AC Power Compatibility: 120 or 230 VAC
Accessories Provided: Manual, AC Power and USB-A Data Cables, Flat Pink Noise Calibration CD
PRICE: $ 1590.00 Each + $ 125.00 for Shipping and Handling (UPS Ground Service to CONUS)
VPE Model 2 DSP Dipole Woofer
"VPE Model 2 Dipole Woofer - I finally had a little time with the unit and I will be doing a lot of more listening before I have a complete perspective on this unit. First off - this unit seamlessly blends with the Magnepan 3.7i and the added bass extension is noticeable on select passages where the 3.7i failed to tread. The midrange is not colored when using this unit and is even made perhaps more vivid and palpable. Like its sibling, the VPE Little Dipole Woofer Model 1 for the LRS / LRS+ and 0.7, the seamless character also allows for soundstaging and image focus and dynamic contrasts. New layers of instrumentation are more clearly revealed as with on of my favorite recordings where a remote background horn now has added realism and precision. Mass voices in the Buena Vista recording also take on significantly more individual identities. The bass and mid-bass have added attack plus improved intonation. So my initial impressions are promising !"
- Robert Raus, Mfg. of Magna Risers and Music Lover
$1590.00 each
Painted Finish with black acrylic top is Standard. Other Finish Options Available at Extra Cost
Shipping and Handling is $125.00 Anywhere in the Continental USA via UPS Ground Service